The previous schedule was a reduction from our original planning but it still required a whole lot of timber. I’ve been thinking more about it and I think I can get it down even more by using the interior walls as load-bearing walls, supporting beams with the SIP walls, closing in some ceilings so I can use smaller joists closer together or engineered joists, and doing a cantilevered roof over perlins (purlons?).

First Floor Posts
* 8″ x 8″ x 7’6″ (6)

First Floor Beams
* 8″ x 10″ x 11′ (1)
* 8″ x 10″ x 14′ (2)
* 8″ x 10″ x 9′ (1)
* 8″ x 10″ x 10′ (1)

Second Floor Joists
* 4″ x 8″ x 11′ (13)
* 4″ x 8″ x 7′ (2)
* 4″ x 8″ x 10′ (13)

Second Floor Posts
* 8″ x 8″ x 11’10″ (1)

Perlins
* 8″ x 10″ x 14′ (2)
* 8″ x 10″ x 10′ (1)
* 8″ x 10″ x 9′ (1)
* 8″ x 10″ x 6′ (1)